Company · About
About Mighty Solution Tech
Mighty Solution Tech Co. (MST) is a Jeddah-based supplier of building and construction materials to contractors and consultants in Saudi Arabia. Founded in 2023 and wholly owned by Mighty Tech Holding, MST puts the customer's requirements at the centre of its business: materials of the highest quality that meet specification, a relationship built on trust, and continuous product development.
Our story
The company was new. The knowledge behind it was not.
MST was founded in Jeddah in 2023 as Material Solution Technology Co. Ltd. Its founders came from the sales side of the Saudi building-materials trade and bring more than 40 years of combined experience, earned in every region of the Kingdom. People who have spent decades at the sales desk have watched the same failures reach site, project after project, and have learned to catch them at the enquiry instead.
It started in fixing systems and finishing materials, and from the first day it defined its job as answering the technical problems contractors and consultants meet during execution. It could have been set up to take orders and compete on price. It was set up to solve problems instead.
The work has since moved earlier in the project, from fixing problems on site to preventing them at the enquiry. Before we price anything, we check the material against the standard that governs it, and we say so when the specified item will not do the job. The certificates travel with the delivery rather than being chased at the end.
Our name
Why Mighty
The company was founded as Material Solution Technology Co. Ltd. In 2026 it adopted the name Mighty Solution Tech to reflect its strength, its dedication to quality and its philosophy of continuous product development. The MST initials stay the same. The word Mighty carries both meanings we stand for:
Powerful, strong
A dependable supplier customers can build a project around.
Large, impressive
A range that keeps growing and improving.
Areas of expertise
Five solution areas. One technical standard across all of them.
Each area carries its own governing standards, corrosion logic and certification route: but the same three questions decide every specification: what does it carry, what is it exposed to, and what must it prove.
Civil Solutions
Structural bolting, anchor bolt assemblies, rebar couplers and formwork accessories, with the waterproofing, tanking and thermal insulation around the concrete.
Construction Chemicals
Admixtures, non-shrink grouts, repair mortars, anchoring adhesives, sealants and industrial flooring, the chemistry that makes the mix work at 45 °C.
MEP Solutions
Beam clamps, threaded rod, channel support, cable containment, pipe fixings and plumbing systems, the support and distribution layer, drill-free where the structure allows.
Sustainable Solutions
Flange bolting for refineries and gas plants, plus mounting structures, balance-of-system and earthing for utility-scale and rooftop solar.
Architectural Solutions
Drywall and ceiling systems, facade and cladding support, tile and movement joint profiles, linear drainage, decorative screens and urban elements, everything that closes and finishes a building.
Foundations
Vision, mission and core values.
Vision
To be a trusted building materials partner for contractors and consultants in Saudi Arabia, and to grow that role across the GCC.
Mission
To supply standard-compliant building materials across five solution areas. Each product is verified before quotation, certified on delivery and available on a single order, so project teams spend less time managing suppliers and paperwork.
Core values
- 01
Compliance first
Every enquiry is checked against the governing standard before we quote.
- 02
Documented delivery
Certificates travel with the goods, so the customer never has to chase paperwork.
- 03
One source
Five solution areas, one order, one point of contact.
- 04
Earned experience
More than 40 years of combined founder experience in Saudi construction.
Coverage
From the raft to the roof sheet.
Most suppliers own one band of a project and hand the rest to someone else. MST covers the full vertical, which is what removes the seams, and the seams are where specification drift happens.
- 01 Below ground
Foundations and tanking
Cast-in anchor bolt assemblies fabricated to drawing, mechanical rebar splices, formwork hardware, and the waterproofing build-up specified for the site's measured ground aggressivity: membrane, primer, protection board and joint detail as one system.
- 02 Structure
The load path itself
Matched structural bolting assemblies certified per heat, flange bolting for pressure-retaining scope, and the concrete chemistry that makes a summer pour work, admixtures dosed for the haul time, non-shrink grout that still flows on a hot base plate.
- 03 Services & envelope
Everything hung and everything closed
Drill-free support for pipework, ductwork and cable containment beneath the slab; solar structures and earthing on the roof; and the facade, cladding and roofing fixings that close the building, each specified to the site's corrosivity category rather than a catalogue default.
Operating principles
Four rules the technical desk works to.
- 01
Engineer the enquiry, not just the order
Most suppliers price what is written on the request. We read it against the governing standard first. Where the specified item will not meet the duty (a galvanized A490, a single-layer membrane in sabkha ground, a pedestrian-rated grate in a service yard, an electro-zinc hanger on a Dammam rooftop) we raise it before it becomes a site instruction.
- 02
Certification travels with the material
An item without traceable documentation is an unverified item. Structural and pressure-retaining supply carries EN 10204 3.1 certification as standard; membranes, admixtures and profiles carry their own proof: batch records, load-class declarations, coating thickness. All of it ships with the delivery.
- 03
Specify for this climate, not a catalogue climate
European and North American finish guidance assumes European and North American exposure. Gulf coastal chloride loading, sustained summer surface temperatures and airborne dust change the answer. Our stock profile reflects the Kingdom, not the catalogue.
- 04
One counterparty across all five areas
Structural bolting, MEP fixings and envelope systems have historically come from separate supply chains with separate lead times and separate paperwork. Consolidating them removes that seam: one purchase order, one submittal, one delivery.
M6 – M100
Diameter range supplied
Metric and imperial to 4 in.
3.1 MTC
Certification on every heat
EN 10204 traceability
8+
Sectors served
Energy, civil, MEP, architectural
24 hr
Technical response
Submittal and take-off support
Organisation
Who answers for what.
A flat structure. Procurement, quality control and internal audit report independently, so the person who buys the material is not the person who signs it off.
- Managing Director
- General Manager
- Reports to GM
HR Manager
- Administration
- Reports to GM
Sales and Marketing Manager
- Sales Supervisor
- Sales Executive
- Reports to GM
Finance Manager
- Financial Accountant
- Reports to GM
Procurement Manager
- Procurement Officers
- Reports to GM
Quality Control Manager
- Reports to GM
Internal Auditor
Bring us in at specification stage, not expediting stage.
The cheapest time to fix a bolting decision is before the purchase order. Our technical desk reviews schedules and specification sections at no cost.