Company · Projects
Representative supply packages from the MST portfolio, grouped by sector and specification rather than by client name.
8 of 8 projects shown
Stud bolt and nut supply across ASME B16.5 and B16.47 flange classes, including sour-service lines requiring hardness-controlled B7M with 2HM nuts. PTFE coating specified throughout for consistent nut factor across controlled-torque sequences.
Cast-in foundation bolt assemblies for long-span roof truss bases, fabricated to drawing with anchor plates, levelling nuts and site templates. Exposed projections hot-dip galvanized; matched A563 DH nuts supplied over-tapped and lubricated.
Torque tube and tracker bolting for a single-axis PV array, specified with serrated flange nuts to resist back-off under daily articulation, plus A2 stainless module clamp hardware at panel level.
Structural bolting for bridge bearing plinths and crash barrier connections, supplied as matched assemblies with hardened washers and full mill certification per heat.
Drill-free beam clamp systems, threaded rod, channel support and lined pipe clamps across chilled water, firefighting and medical gas services, electro-zinc internally, hot-dip galvanized on rooftop plant.
Roofing, cladding and sandwich panel fixings specified for chloride exposure: Class 4 coated self-drilling screws with EPDM bonded washers, A4 stainless at all exposed facade connections, with isolation washers at aluminium interfaces.
Combined structural and process bolting scope across pipe racks, pump bases and process flanges, with stainless and duplex grades selected for seawater-side service.
Made-to-order fasteners in super duplex and nickel alloy for high-chloride and elevated-temperature service, supplied with PMI, hardness reporting and 3.2 certification under third-party witness.
The sector packages above are described without client names where confidentiality terms apply. The named record and material approvals that follow are published as MST submits them in its own prequalification pack. Full submittal documents, delivered tonnages and certification packages are available to qualified enquiries on request.
Delivery model
Grade, finish and standard confirmed against the specification before quotation.
Datasheets, standards references and coating details formatted for consultant approval.
EN 10204 3.1 as standard, 3.2 with witness, PMI and hardness where required.
Marked, bagged and scheduled by connection or by zone to suit the installation sequence.
Named supply record
Sixteen supply lines from the MST prequalification record, with the main contractor and consultant on each. Reproduced as MST submits them.
| Ref | Product | Main contractor | Consultant | Project |
|---|---|---|---|---|
| 01 | Skirting | OCC Weavers | EGIS | Novotel Hotel |
| 02 | Stair nosing | OCC Weavers | EGIS | Novotel Hotel |
| 03 | Aluminium trim | NESMA | PACE | The Avenues, Riyadh |
| 04 | Aluminium profiles | Altammimi | EGIS | Amaala |
| 05 | Stainless steel bars | NESMA | Red Sea Global | Red Sea |
| 06 | Handrail | SACODECO | ZKRI | DQ Core, Riyadh |
| 07 | Support frames | Red Sea | Red Sea Global | Red Sea |
| 08 | Decorative items | SACODECO | ZKRI | DQ Core, Riyadh |
| 09 | Fasteners | Abdullah Fouad Impalloy Co. | — | Various Aramco and non Aramco projects |
| 10 | Fasteners | Trans Country Industrial Co. | — | Various Aramco and non Aramco projects |
| 11 | Threaded rod | SACODECO | Dar Al Handasah | Haram, Makkah |
| 12 | Decorative items, plated | SACODECO | ZKRI | DQ Core, Riyadh |
| 13 | Support system | SACODECO | Dar Al Handasah | Jeddah Tower |
| 14 | Skirting | FAST | Saudi Consult | Jeddah Airport |
| 15 | Handrail | FAST | Saudi Consult | Jeddah Airport |
| 16 | Gypsum profiles | Architecture Excellence | Alrokn Engineering Consultants | Novotel, Riyadh |
Material approvals
Consultant reviewed material submittals, each with its document reference and the status exactly as the reviewer wrote it.
SS304 fish tailed wall tie and three hole wall tie, external facade cavity walls
Approved in principle, subject to manufacturer calculations and stainless steel samples · February 2026
Supplier prequalification for Material Solution Technology
Approved as submitted · March 2025
Stainless steel 316L dowel bars, marine grade, for exposed elements
Accepted with comments, for 316L grade dowels · November 2024
Aluminium flashing for external application
Accepted with comments, subject to client approval of the material change and site mock up · March 2024
Tell us the sector and the specification section. We will match it against comparable packages and put you in touch with the technical lead who handled it.